How to create and configure a network#
To create and configure a managed network, use the
lxc network command and its subcommands.
--help to any command to see more information about its usage and available flags.
The following network types are available:
Create a network#
Use the following command to create a network:
lxc network create <name> --type=<network_type> [configuration_options...]
See Network types for a list of available network types and links to their configuration options.
If you do not specify a
--type argument, the default type of
bridge is used.
Create a network in a cluster#
If you are running a LXD cluster and want to create a network, you must create the network for each cluster member separately. The reason for this is that the network configuration, for example, the name of the parent network interface, might be different between cluster members.
Therefore, you must first create a pending network on each member with the
--target=<cluster_member> flag and the appropriate configuration for the member.
Make sure to use the same network name for all members.
Then create the network without specifying the
--target flag to actually set it up.
For example, the following series of commands sets up a physical network with the name
UPLINK on three cluster members:
lxc network create UPLINK --type=physical parent=br0 --target=vm01 lxc network create UPLINK --type=physical parent=br0 --target=vm02 lxc network create UPLINK --type=physical parent=br0 --target=vm03 lxc network create UPLINK --type=physical
Configure a network#
To configure an existing network, use either the
lxc network set and
lxc network unset commands (to configure single settings) or the
lxc network edit command (to edit the full configuration).
To configure settings for specific cluster members, add the
For example, the following command configures a DNS server for a physical network:
lxc network set UPLINK dns.nameservers=220.127.116.11
The available configuration options differ depending on the network type. See Network types for links to the configuration options for each network type.
There are separate commands to configure advanced networking features. See the following documentation: