How to configure network load balancers

Note

Network load balancers are currently available for the OVN network.

Network load balancers are similar to forwards in that they allow specific ports on an external IP address to be forwarded to specific ports on internal IP addresses in the network that the load balancer belongs to. The difference between load balancers and forwards is that load balancers can be used to share ingress traffic between multiple internal backend addresses.

This feature can be useful if you have limited external IP addresses or want to share a single external address and ports over multiple instances.

A load balancer is made up of:

• A single external listen IP address.

• One or more named backends consisting of an internal IP and optional port ranges.

• One or more listen port ranges that are configured to forward to one or more named backends.

Create a network load balancer

Use the following command to create a network load balancer:

incus network load-balancer create <network_name> <listen_address> [configuration_options...]

Each load balancer is assigned to a network. It requires a single external listen address (see Requirements for listen addresses for more information about which addresses can be load-balanced).

Load balancer properties

Network load balancers have the following properties:

Property	Type	Required	Description
listen_address	string	yes	IP address to listen on
description	string	no	Description of the network load balancer
config	string set	no	Configuration options as key/value pairs (only user.* custom keys supported)
backends	backend list	no	List of backend specifications
ports	port list	no	List of port specifications

Requirements for listen addresses

The following requirements must be met for valid listen addresses:

• Allowed listen addresses must be defined in the uplink network’s ipv{n}.routes settings or the project’s restricted.networks.subnets setting (if set).

• The listen address must not overlap with a subnet that is in use with another network or entity in that network.

Configure backends

You can add backend specifications to the network load balancer to define target addresses (and optionally ports). The backend target address must be within the same subnet as the network that the load balancer is associated to.

Use the following command to add a backend specification:

incus network load-balancer backend add <network_name> <listen_address> <backend_name> <listen_ports> <target_address> [<target_ports>]

The target ports are optional. If not specified, the load balancer will use the listen ports for the backend for the backend target ports.

If you want to forward the traffic to different ports, you have two options:

• Specify a single target port to forward traffic from all listen ports to this target port.

• Specify a set of target ports with the same number of ports as the listen ports to forward traffic from the first listen port to the first target port, the second listen port to the second target port, and so on.

Backend properties

Network load balancer backends have the following properties:

Property	Type	Required	Description
name	string	yes	Name of the backend
target_address	string	yes	IP address to forward to
target_port	string	no	Target port(s) (e.g. 70,80-90 or 90), same as the port’s listen_port if empty
description	string	no	Description of backend

Configure ports

You can add port specifications to the network load balancer to forward traffic from specific ports on the listen address to specific ports on one or more target backends.

Use the following command to add a port specification:

incus network load-balancer port add <network_name> <listen_address> <protocol> <listen_ports> <backend_name>[,<backend_name>...]

You can specify a single listen port or a set of ports. The backend(s) specified must have target port(s) settings compatible with the port’s listen port(s) setting.

Port properties

Network load balancer ports have the following properties:

Property	Type	Required	Description
protocol	string	yes	Protocol for the port(s) (tcp or udp)
listen_port	string	yes	Listen port(s) (e.g. 80,90-100)
target_backend	backend list	yes	Backend name(s) to forward to
description	string	no	Description of port(s)

Edit a network load balancer

Use the following command to edit a network load balancer:

incus network load-balancer edit <network_name> <listen_address>

This command opens the network load balancer in YAML format for editing. You can edit both the general configuration, backend and the port specifications.

Delete a network load balancer

Use the following command to delete a network load balancer:

incus network load-balancer delete <network_name> <listen_address>